Hot Air Stenter | Flat Screen Printer Factory - Hotiarstenter.com

Requirements for the glue of Open Type Rotary Screen Printing Machine Since 80% of the defects in the printing process are caused by the printing paste, there are strict requirements on the quality of the glue, mainly including: The glue must be prepared before opening the machine . The color of the glue must match the original. The glue should maintain a proper consistency. Generally, the thinner the fabric, the greater the consistency of the glue, the finer the pattern, and the consistency of the glue. The printing paste should be fully dissolved. After the preparation is completed, the nylon mesh should be used for filtration to avoid impurities blocking the net or damage the rotary screen. Requirements for rotary screen printing machine The rotary screen printing machine should be thoroughly inspected before driving to ensure that there are no foreign objects in the printed tape to avoid damage to the tape. The temperature of the drying room should be adjust...

Most of the screen printing procedures are different; we can discuss about the difference between Flat Screen Printing Machine & Rotary Screen Printing Process: As to Flat Screen Printer , the screen is flat and moves up and down. Beside, the Rotary screen is round in size and it rotates. In Flat screen printer, the Squeeze is used. In Rotary Screen Printing, just Roller is used. Small width fabric (45-50″) is printed on Flat Screen Printing. On the other side, large width fabric is printed on Rotary screen printing. In flat screen printing pattern, there are only 6 to 8 color is available. But if you use the Rotary Screen printing, then you will be able to use 16 to 24 colors in a pattern. Flat screen printer process gives a lower production rate. And the Rotary Screen printing is comparatively faster than Flat Screen printing and production rate is 3 times higher than that. The initial investment cost for Flat screen printing machine is low, so that it’s less expens...