Skip to main content

Tips on Cleaning Flat Screen Printer Licheng

Our Flat Screen Printing Machine is environmentally friendly, which does not cause pollution. However, in order to make the equipment last longer, it is necessary to adopt several methods to clean the equipment.
First, the electronic cleaning method achieves the effect of descaling and anti-scaling by electrons.
Second, electrostatic cleaning method, as the name suggests, is to achieve anti-scaling and descaling effects through the static electricity of the flat screen printing machine.
Third. it is worth noting that the main functions of the mechanical cleaning method of the flat screen printing machine are the cleaning device and the blade cleaning method, the drill pipe cleaning method and the shot blast cleaning method.
Fourth. the physical cleaning method is mainly to remove the dirt component by applying the external force to various soils by means of hand tools and machinery. That is the method of not changing the original chemical molecular component.
Last, there is also a cleaning method for the Flat Screen Printer , which is a water cleaning method. It is a relatively low cleaning method and is generally not recommended for everyone. Once you have mastered the above methods, you will be relatively skilled when cleaning.
As production equipment, our flat screen printing machine is used in the textile printing and dyeing industry, especially for the manufacture of towels (including bath towels, beach towels, decorative towels, towel tapestries, etc.). The flat screen printing machine transports the towel by the rubber conveyor belt (referred to as the guide belt). The multiple flat nets are overprinted on the towel with different colors. The accuracy of the printing and color registration directly affects the beauty and quality level of the finished towel, so it is required to drag.
In order to improve production efficiency and reduce costs, it is necessary to maintain a certain printing speed. If the speed is too fast, the inertia is too large, the guide belt is difficult to stop, and the positioning color is inevitably inaccurate, which can’t be unavoidable.

Labels

Labels:

Comments

Post a Comment

Popular posts from this blog

Preliminary Preparation of Rotary Screen Printing Machine II

Requirements for the glue of Open Type Rotary Screen Printing Machine Since 80% of the defects in the printing process are caused by the printing paste, there are strict requirements on the quality of the glue, mainly including: The glue must be prepared before opening the machine . The color of the glue must match the original. The glue should maintain a proper consistency. Generally, the thinner the fabric, the greater the consistency of the glue, the finer the pattern, and the consistency of the glue. The printing paste should be fully dissolved. After the preparation is completed, the nylon mesh should be used for filtration to avoid impurities blocking the net or damage the rotary screen. Requirements for rotary screen printing machine The rotary screen printing machine should be thoroughly inspected before driving to ensure that there are no foreign objects in the printed tape to avoid damage to the tape. The temperature of the drying room should be adjust...
Post a Comment
Read more

Inaccurate Registration of Rotary Screen Printer

When two or more patterns of registrations are printed, all or part of the patterns on the printed fabric are staggered or overlapped, which is seriously inconsistent with the original, called inaccurate registration. (1)Constant Inaccurate Registration Constant Inaccurate Registration means that the registration is not inaccurate from the start of driving, and the corresponding pattern always shifts from the original position or overlaps. The low impact factors of such problems can be found in the following reasons: the accuracy of the printing machine, the rotary screen and its plate making, the process, the operation, the printed fabric, and the patch pulp. (2)Inaccurate Left and right Registration That is to say, the registration is accurate in the middle, but inaccurate on the right or left. In this case, it is necessary to check whether the mechanical operation of the rotary screen printing part is normal; whether the film draft conforms to each set of film ...
Post a Comment
Read more

ZCMD768 Type Hot Air Stenter

The Hot Air Stenter Machine is always used for stretching and tensioning the fabric by heating and stretching the two sides with uniform width. The continuous flat dyeing and finishing of knitted fabrics can optimize printing quality, and reduce damage to the fabric with excellent flexibility. In addition, it can reduce the cost of the mercerizing machine. The hot air stenter is mainly used to make the weaving machine. Generally, the hot air stenter uses the heat transfer oil to heat the air in the setting machine, and then heats the fabric. When the fabric reaches a certain temperature and remains for a certain period of time, the structure of the fabric changes to achieve the purpose of setting. The double-point lining coater is the main equipment for processing high-grade low-elastic linings and thin non-woven linings. It mainly consists of several parts such as retort, slurry coating, dust coating, up and down suction, drying room, cooling and winding, pneumatic a...
Post a Comment
Read more