Skip to main content

Inaccurate Registration of Rotary Screen Printer

When two or more patterns of registrations are printed, all or part of the patterns on the printed fabric are staggered or overlapped, which is seriously inconsistent with the original, called inaccurate registration.
(1)Constant Inaccurate Registration
Constant Inaccurate Registration means that the registration is not inaccurate from the start of driving, and the corresponding pattern always shifts from the original position or overlaps. The low impact factors of such problems can be found in the following reasons: the accuracy of the printing machine, the rotary screen and its plate making, the process, the operation, the printed fabric, and the patch pulp.
(2)Inaccurate Left and right Registration
That is to say, the registration is accurate in the middle, but inaccurate on the right or left.
In this case, it is necessary to check whether the mechanical operation of the rotary screen printing part is normal; whether the film draft conforms to each set of film and the door width shrinks when it enters the printing circular net. Generally, printing cotton cloth is to prevent wrinkles, so pre-tensioning will be carried out. If the pre-tensioning is excessive, the cloth surface will shrink sharply when it receives the printing paste, and the registrations on the left and right sides will be inaccurate.
(3) Circle Registration is not accurate
The rickets have been inaccurate from the beginning, and such rickets are mainly related to the rotary screen printer . The rotary screen plate is not well thought out, and the relationship between color and color and pattern is not properly handled, so that misalignment and whiteness are generated in the printing process. Inconsistent circumference of the nickel mesh will also cause this problem, because of the accuracy problem. Therefore, when using nickel mesh, the same batch of nickel mesh must be used to minimize the error.
As a professional Open Type Rotary Screen Printer and Flat Screen Printing Machine Manufacturer- Zhejiang LiCheng tell you that please reading more information before purchasing rotary screen printer, if you interested in our products, please feel free to contact us any time.
Labels:

Comments

Post a Comment

Popular posts from this blog

Feeding Operation of Hot Air Stenter

Do you are already familiar with the feeding operation of the Hot Air Stenter machine? Although this operation is relatively simple, the problems that need attention are relatively trivial, and this operation will affect the subsequent processing effect of the hot air stenter machine. So as a user, we also need to pay attention to this part of the content. In actual work, we must wear the guide cloth according to the requirements, and check the worn guide cloth to ensure correctness. Then we need to clean the hot air stenter machine first, especially pay attention to check the cloth rack and the front of the machine for dirt, and clean it in time. In addition, you need to check the needle clip for debris and clean it up. In addition, the site environment should be kept clean and hygienic. When the inspection work is completed, we need to classify the fabrics to be produced according to the process conditions. Generally, the same process fabrics will be used for centr...
Post a Comment
Read more

Structural Characteristics of Hot Air Stenter Machine

The Hot Air Stenter machine is mainly composed of the feeding part, the weft feeder, the chain, the oven body, and the falling cloth. Apart from that, chemical systems and oil furnace heating systems. 1.Feeding part The structure is relatively simple, consisting of a trough and a roll. The cloth enters the trough, carries the chemical material, and then presses the excess chemical material through the roll to clean it. Therefore, the chemical material on the cloth is very uniform, which is a prerequisite for obtaining a high quality styling cloth. It is necessary to always pay attention to whether the pressure on the left and right sides of the roll is consistent. Otherwise, the side with less pressure is loaded more, while the one with higher pressure is less loaded, and the cloth will have quality problems such as inconsistency. 2. Weft feeder The weft aligner on the fixed machine has four sets of sensors. Each sensor consists of two parts: illuminating and sen...
Post a Comment
Read more

LiCheng Flat Screen Printing Machine

Zhejiang LiCheng is devoted towards offering the qualitative range of Flat Screen Printing Machine , as per client’s precise need and requirements.   Flat screen printing machine working principle: Take the commonly used hand-screen flat screen printing machine as an example, the working principle of the screen printing machine can be described as follows: The transmission mechanism transmits the power so that the squeegee squeezes the ink and the screen printing plate during the movement so that the screen Printing plate and the substrate to form a nip, the screen has tension N1 and N2, the force on the squeegee F2, rebound so that the screen printing plate in addition to the imprinting line are not in contact with the substrate, the ink in Under the action of the squeezing force F1 of the squeegee, the squeegee slides from the moving nip to the substrate through the mesh. In Flat Screen Printing Technology the screen is flat and moves up and down. the Squeez...
Post a Comment
Read more