Skip to main content

Heating Technology of Hot Air Stenter Machine

As a piece of equipment in the textile printing and dyeing factory, Hot Air Stenter Machine is used for stretching and tensioning the fabric by heating and stretching.
The heat setting of the fabric is usually a process in which the fabric is kept at a certain size and heated under a certain temperature and humidity for a certain period of time and then cooled. Therefore, the main process conditions for heat setting are nothing more than temperature, time, tension, etc.
First, the temperature
Temperature is an important factor. Since the fabric is heat-set, the degree of wrinkles that have been eliminated, the improvement of surface flatness, the thermal stability of the fabric and other performances are closely related to the heat setting temperature.
Second, the time
The setting time is another major process condition for heat setting. After the fabric enters the heating zone, the heat setting can be divided into the following sections:
The time required to heat the fabric surface to the set temperature after the fabric enters the heating zone is also called the heating time.
After the surface of the fabric reaches the set temperature, the fibers in the inner and outer portions of the fabric have the same heat penetration time required for the same set temperature.
After the fabric reaches the set temperature, the time required for the molecules in the fiber to be adjusted according to the setting conditions, or molecular adjustment time.
The time required for the fabric to exit the oven and the size of the fabric to be fixed for cooling, or cooling time.
Usually, the time often refers to the time required for the above three items, not including the fourth item. If the first item is regarded as a kind of preheating, then the setting time refers only to the time required for the second and third items, namely the time required for heat penetration and molecular adjustment. If you interested learn more about Flat Screen Printing Machine , please click https://www.hotairstenter.com/product/hot-air-stenter.html

Comments

Popular posts from this blog

Preliminary Preparation of Rotary Screen Printing Machine II

Requirements for the glue of Open Type Rotary Screen Printing Machine Since 80% of the defects in the printing process are caused by the printing paste, there are strict requirements on the quality of the glue, mainly including: The glue must be prepared before opening the machine . The color of the glue must match the original. The glue should maintain a proper consistency. Generally, the thinner the fabric, the greater the consistency of the glue, the finer the pattern, and the consistency of the glue. The printing paste should be fully dissolved. After the preparation is completed, the nylon mesh should be used for filtration to avoid impurities blocking the net or damage the rotary screen. Requirements for rotary screen printing machine The rotary screen printing machine should be thoroughly inspected before driving to ensure that there are no foreign objects in the printed tape to avoid damage to the tape. The temperature of the drying room should be adjust...

Inaccurate Registration of Rotary Screen Printer

When two or more patterns of registrations are printed, all or part of the patterns on the printed fabric are staggered or overlapped, which is seriously inconsistent with the original, called inaccurate registration. (1)Constant Inaccurate Registration Constant Inaccurate Registration means that the registration is not inaccurate from the start of driving, and the corresponding pattern always shifts from the original position or overlaps. The low impact factors of such problems can be found in the following reasons: the accuracy of the printing machine, the rotary screen and its plate making, the process, the operation, the printed fabric, and the patch pulp. (2)Inaccurate Left and right Registration That is to say, the registration is accurate in the middle, but inaccurate on the right or left. In this case, it is necessary to check whether the mechanical operation of the rotary screen printing part is normal; whether the film draft conforms to each set of film ...

ZCMD768 Type Hot Air Stenter

The Hot Air Stenter Machine is always used for stretching and tensioning the fabric by heating and stretching the two sides with uniform width. The continuous flat dyeing and finishing of knitted fabrics can optimize printing quality, and reduce damage to the fabric with excellent flexibility. In addition, it can reduce the cost of the mercerizing machine. The hot air stenter is mainly used to make the weaving machine. Generally, the hot air stenter uses the heat transfer oil to heat the air in the setting machine, and then heats the fabric. When the fabric reaches a certain temperature and remains for a certain period of time, the structure of the fabric changes to achieve the purpose of setting. The double-point lining coater is the main equipment for processing high-grade low-elastic linings and thin non-woven linings. It mainly consists of several parts such as retort, slurry coating, dust coating, up and down suction, drying room, cooling and winding, pneumatic a...